UNITECH

► Accepts Universal inputs – 4-20 mA or 0-10 V or pulse(2 or 3 wire).

► Non-volatile memory to retain Totaliser flow,

► Liner or Square root input selections with 0.1% Accuracy.

► 8/10 digit Flow Totaliser with password protected resetting.

► Retransmission and RS-485/232 communication Available.

► Weather proof or flame proof housing.

► GSM mobile connectivity for wireless remote reading purpose.(sms)

► The Instrument can be configured to work on Steam Natural gas or any gas.

► Accepts up to three inputs– FLOW(mA), PRESSURE(mA),TEMPERATURES (RTD)

► Gives efficient Pressure and Temp. Compensations for Mass Flow calculations.

► Retransmission and RS-485/232 communication Available.

► Calculates Flow rates in NM3/Hr. or SM3/Hr. – as selected.

► 8/10 digit Flow Totaliser with password protected resetting.

► Weather proof or flame proof housing.

♦ Accept hi accurate universal inputs 4-20 mA or 0-10 VDC or pulse(2 or 3 wire).

♦ Maximum 4 C/O on batch values Generated.

♦ 5 digit flow rate and 10 digit total.

♦ Liner or Square root selections with 0.1% accuracy.

♦ All Standard batch fuctions included Like Start Stop and Pause.

♦ GSM mobile connectivity for wireless remote reading purpose(SMS).

► 4-20 mA loop current input.

► 8/10 digit Flow Totaliser with password protected resetting.

► Liner or Square root input selections with 0.1% Accuracy.

► Weather proof or Flame proof housing.

► Non-volatile memory to retain Totaliser flow,

► Loop voltage drop less than 2 volt.

♦ Accepts up to three inputs– FLOW ( mA ), TEMPERATURES-1 (RTD), TEMPERATURES-2 (RTD).

♦ Isolated 0/4-20mA retransmission output Proportional to standard flow rate.

♦ Multi Parameter Auto scroll display like temp. in and temp. out and total.

♦ Non-volatile memory to retain totaliser flow, no need of battery to change.

♦ FIT-used in chilled water,condenser water, and hot water systems.

♦ The engineering unit can be selected as either KW & KWHR or BTU/Hr & BTU.

♦ Based on calculations of thermal power & energy consumed through measurement of floe, temperature diffrence of inlet & outlet of the medium.