ON / OFF CONTROLLER (SINGLE DISPLAY)
♦ Microprocessor Based Powerful & Highly Reliable Controller.
♦ Universal Input T/C, RTD, Linear Input Selection.
♦ Potential Free Relay Contact Output Up To 1 / 2 / 3 / 4 Nos.
♦ 0.1% Accuracy Of FSD.
♦ Isolated 0/4-20 mA Process Value Re-Transmission Output.
♦ All Configurations And Calibrtion From Front Panel Keypad.
♦ Highly Communicative Serial Interface Facility (RS 232/485).
♦ Transmitter Loop Power Supply With Current Limit As Standard.
♦ Power Supply :230 V/110 V AC. Or 24 V/12 V DC.
♦ Optional GSM Mobile Connectivity.
♦ Fully Password Protected Operation.
♦ User Friendly Menu For Device Configurations & Calibration.
♦ Field Configurable.
♦ All Different Input In Single Controller.
♦ Microprocessor based powerful & highly reliable controller.
♦ Universal Input T/C, RTD, linear input selection.
♦ Potential Free Relay contact output up to 1 / 2 / 3 / 4 Nos.
♦ 0.1% Accuracy of FSD.
♦ Isolated 0/4-20 mA process value retransmission output.
♦ All Configurations and Calibration from front panel keypad.
♦ High speed communicative serial (RS 232/485) interface.
♦ Transmitter loop power supply with current limit as standard.
♦ Power supply : 230V/110V AC or 24V/12V DC.
♦ Optional GSM mobile connectivity.
♦ Fully Password Protected Operation.
| INPUT | Input Type | T/C | K, J, R, S, E, N, T |
| RTD | Pt-100, Cu53 ( 2wire & 3 wire) | ||
| Current | 0 - 20mA DC, 4 - 20mA DC | ||
| Voltage | 0 - 5 V / 1 - 5 V / 0.5 -2.5V / 0 - 10 V DC | ||
| Special on demand | 0-75/200 mV & 0-1/10V/100/300 V AC/DC | ||
| 0-75/200 mV 0-100/300V DC | |||
| Resistance | 0-500 R , 0-1/5/10 K, 1M | ||
| Transmitter Power Supply | 24 V DC @ 30 mA max, isolated from I/P & O/P | ||
| Cold Junction Comp. & Sensor Break Ind. | Software base Automatic | ||
| Range limits | As per input range Table | ||
| Accuracy | +/- 0.1 % of span for linear & RTD, +/-0.25 % for T/C | ||
| Input Impedance | >330 K for Voltage ,mV, and T/C, 100 R for current | ||
| INDICATION | Indication | PV & SV for UT - 102 & PV for UT - 101 - LED 4 digit 7 segment display. | |
| Status Indication | LEDs for Relay Status & Communication | ||
| Alarm Modes | Low / High | ||
| CONTROL MODE | On / Off Control | Relay / SSR | |
| Dead Band Controls | High & Low Set Point for Level Application | ||
| OUTPUT | Relay Output | NO - C - NC Contacts , 5A @240 V AC Resistive | |
| SSR Output | 1 / 2 / 3 / 4 Relays / SSR output | ||
| Transmitter Power | 24 V DC @ 20 mA, 12 V DC @ 20 mA DC | ||
| Retransmission Current & Voltage Outputs | 0 - 20 / 4 - 20 mA, 0 - 5 / 0 - 10 V / 1 - 5 V DC Isolated | ||
| COMMUNICATION | Communication Protocol & Mathod | Modbus RTU RS- 485/RS- 232 Communication | |
| Programmable Parameter | Baud Rate, Parity, Node Address, Stop Bit & 0-256 Unit | ||
| Wireless Communication | GSM / GPRS base Mobile(SMS) Communication | ||
| PROGRAMMABLE PARAMETER | Setpoint / Hysteresis / High Scale / Low Scale | Full Range as per Input Selection. | |
| Relay Logic | F.S. High & Low Alarm, Dead Band Alarm | ||
| Display Resolution | -1999 to 9999 Fully Configurable for Linear Input | ||
| Prameter Programming | Through 4 Tactile Keys | ||
| OTHER | Dimension & Mounting | As per Box Selection Panel Mount/ Weather Proof / FLP Wall Mount | |
| (A) Supply Voltage (B) Power Consumption | (A) 110/230 V AC / 24 V DC, 50/60 Hz (B) 4 watts maximum | ||
| Operating Ambient Temperature and Humidity | Temp. 0 - 50 °C , and Humidity: Below 90% Non Condensing | ||
