BTU / TR TOTALIZER
♦ Multi Parameter Auto scroll display like temp. in and temp. out and total.
♦ Accepts up to three inputs– FLOW ( mA ), TEMPERATURES-1 (RTD), TEMPERATURES-2 (RTD)
♦ It Calculates And Displays Heat Flow In Kcal/Hr., And Net Heat Energy Consumed In Kcal
♦ Non-volatile memory to retain totaliser flow, no need of battery to change.
♦ Isolated 0/4-20mA retransmission output Proportional to standard flow rate
♦ Field operated User friendly menu for device Configurations & Calibration.
♦ 8/10 digit Flow Totaliser with password protected resetting.
♦ Fully password protection for Tamper free operation.
♦ Isolated Highly communicative serial interface facility (RS 232/485).
♦ 24 V loop power supply for flow.
♦ Optional GSM mobile connectivity for Wireless Remote reading purpose.(SMS)
♦ Flow Metering computer software available.
♦ Weather proof or flame proof housing.
♦ Multi Parameter Auto scroll display like temp. in and temp. out and total.
♦ Accepts up to three inputs– FLOW ( mA ), TEMPERATURES-1 (RTD), TEMPERATURES-2 (RTD)
♦ Non-volatile memory to retain totaliser flow, no need of battery to change.
♦ Isolated 0/4-20mA retransmission output Proportional to standard flow rate
♦ Field operated User friendly menu for device Configurations & Calibration.
♦ 8/10 digit Flow Totaliser with password protected resetting.
♦ Fully password protection for Tamper free operation.
♦ Isolated Highly communicative serial interface facility (RS 232/485).
♦ 24 V loop power supply for flow.
♦ Optional GSM mobile connectivity for Wireless Remote reading purpose.(SMS)
♦ Flow Metering computer software available.
♦ Weather proof or flame proof housing.
| INPUT | Input Type | Flow : | 4-20 mA Dc / 0-10 V DC |
| Temperatures 1-In : | 4-20mA DC / 0 - 10 V DC Or Other Linear Type | ||
| Temperatures 2-Out : | Td Pt. - 100 3 Wire & 4-20 mA | ||
| Transmitter Power Supply | 24 V DC @ 30 mA Max, Isolated From I/P & O/P | ||
| Input Mode | Linear Or Square Root | ||
| Range Limits | As Per Input Range Table | ||
| Accuracy | +/- 0.1 % Of Span For Linear & RTD, +/-0.25 % For T/C | ||
| Input Impedance | >330 K For Voltage ,mV, And T/C, 100 R For Current | ||
| INDICATION | Indication | Touch LCD Type : | 3.5 Inch Touch Screen 5 Digit Flow Rate & 10 Digit Totalizer. |
| LCD Type : | 5 Digit Flow Rate & 10 Digit Flow Totalizer | ||
| Status Indication | LEDs For Relay Status & Communication | ||
| Alarm Modes | Very Low / Low / High / Very High | ||
| MASS CALCULATION | MASS CALCULATION FOR GAS- AIR | Gas : AGA-9/11, & For Orifice Or Venture Flow Meter | |
| Display | Display :- Temperature , Flow and Pressure & Sm3 and Kg/Hr. option | ||
| OUTPUT | Relay Output | NO - C - NC Contacts , 5A@240 V AC Resistive | |
| 2 Relay Output For Fine And Corse Output | |||
| Transmitter Power | 24 V DC @ 20 mA ,12 V DC @ 20 mA | ||
| Retransmission Current & Voltage Outputs | 0~20/ 4~20 mA, 0 ~ 5 V , 0 ~ 1 0 V , 1 ~ 5V DC, Fully 3 Port Isolated | ||
| COMMUNICATION | Communication Protocol & Method | Modbus RTU RS- 485/RS- 232 or Ethernet Communication | |
| Programmable Parameter & Max No. | Baud Rate, Parity , Node Address , Stop Bit & 0-256 Unit | ||
| Wireless Communication | GSM/GPRS Base Mobile(sms) Communication | ||
| PROGRAMMBALE PARAMETERS | Set point / Hysteresis / High Scale / Low Scale | Full Range As Per Input Selection. | |
| Relay Logic | F.S. High & Low Alarm, Dead Band Alarm | ||
| Display Resolution | -1999 to 9999 Fully Configurable For Linear Input | ||
| Programming Of Parameters | Through 4 Tactile Keys | ||
| OTHER | Dimensions & Mounting | As Per Box Selection & Wall/Structure 2/2 Holes | |
| (A) Supply Voltage (B) Power Consumption | (A) 110/230 AC/24 V DC, 50/60 Hz (B) 4 Watts Maximum | ||
| Operating Ambient Temperature And Humidity | 0~50 °C , and Humidity : Below 90%, Non Condensing | ||
