FLOW RATE TOTALISER

UT-1201

  • FLOW RATE INDICATOR & TOTALIZER

     

    ♦ Accepts Universal Inputs: 4 – 20 mA Or 0 – 10 V DC Or Pulse (3 & 2 Wire) Input Type.

    ♦ Non-Volatile Memory To Retain Totalizer Flow, No Need To BaƩery Change.

    ♦ Potential Free Relay Contact Output 2 X Flow And 2 X Totalizer.

    ♦ Liner Or Square Root Input Selections With 0.1% Accuracy.

    ♦ Isolated 0 / 4 – 20 mA DC Retransmission Output Proportional To Standard Flow Rate.

    ♦ Field operated user friendly menu for device configurations & calibration.

    ♦ 8/10 digit Flow Totaliser with password protected reset.

    ♦ Fully password protection for tamper free operation.

    ♦ Isolated High speed communicative serial interface facility (RS-232/485).

    ♦  24 V Loop Power Supply For Flow Transmitter

    ♦ Optional GSM mobile connectivity for wireless Remote access (SMS).

    ♦ Flow Monitoring & Data Logging Computer SoŌware Available.

    ♦ Available In Weather Proof Or Flame Proof Housing.

  •  FEATURE

     

    ♦ Multi Parameter Auto scroll display like Steam press., temp., Nm3 and Sm3

    ♦ The instrument can be configured to work on SATURATED or SUPERHEATED or BOTH.

    ♦ Non-volatile memory to retain totalized flow, no need of battery to change.

    ♦ Gives efficient Pressure and Temp. Compensations for mass flow calculation.

    ♦ Calculates Flow rate in NM3/Hr or SM3/Hr as selected.

    ♦ Liner or square root input selection with 0.1% Accuracy.

    ♦ Isolated 0/4-20mA retransmission output proportional to standard flow rate.

    ♦ Field operated user friendly menu for device configurations & calibration.

    ♦ 8/10 digit Flow Totaliser with password protected reset.

    ♦ Fully password protection for tamper free operation.

    ♦ Isolated High speed communicative serial interface facility (RS-232/485).

    ♦ 2 nos. 24 Volt loop power supply for Flow & Pressure Transmitter.

    ♦ Optional GSM mobile connectivity for wireless Remote access (SMS).

    ♦ Flow Meter computer software available.

    ♦ Weather proof or flame proof housing.

    ♦ Linear or square root option and automatic unit changable.

INPUT Input Type Currant : 0 ~ 20 mA DC , 4~20 mA DC
Voltage: 0-5 V/1-5 V, 0.5 -2.5 V/0- 1 0V DC
Pulse : 3 Wire PNP, NPN & 2 Wire NAMUR Type
24 V DC @ 30 mA Max, Isolated From I/P & O/P
Linear Or Square Root
Range Limits As Per Input Range Table
Accuracy +/- 0.1 % Of Span For Linear & RTD, +/-0.25 % For T/C
Input Impedance >330 K \For Voltage ,mV, And T/C, 100 R For Current
INDICATION Indication TOUCH LCD TYPE : 3.5 Inch Touch Screen 5 Digit Flow Rate & 10 Digit Totalizer.
LCD TYPE : 5 Digit Flow Rate & 10 Digit Totaliser-16x2 Line
Status Indication LEDs For Relay Status & Communication
Alarm Modes Very Low / Low / High / Very High
CONTROL MODE On Off Control Relay / SSR
Dead Band Controls High And Low Set Point for Level Application
OUTPUT Relay Output NO - C - NC Contacts , 5A@240 V AC Resistive
SSR Output 1 / 2 Relays / SSR Output
Transmitter Power 24 V DC @ 20 mA ,12 V DC @ 20 mA
Retransmission Current & Voltage Outputs 0~20/ 4~20 mA, 0 ~ 5 V , 0 ~ 1 0 V , 1 ~ 5V DC, Fully 3 Port Isolated
COMMUNICATION Communication Protocol & Method Modbus RTU RS- 485/RS- 232 Or Ethernet Communication
Programmable Parameter & Max No. Baud Rate, Parity , Node Address , Stop Bit & 0-256 Unit
Wireless Communication GSM/GPRS Base Mobile(sms) Communication
PROGRAMMBALE PARAMETERS Set point / Hysteresis / High Scale / Low Scale Full Range As Per Input Selection.
Relay Logic F.S. High & Low Alarm, Dead Band Alarm
Display Resolution -1999 to 9999 Fully Configurable For Linear Input
Programming Of Parameters Through 4 Tactile Keys
OTHER Dimensions & Mounting As Per Box Selection & Wall/Structure 2/2 Holes
(A) Supply Voltage (B) Power Consumption (A) 110/230 AC/24 V DC, 50/60 Hz (B) 4 Watts Maximum
Operating Ambient Temperature And Humidity 0~50 °C , and humidity : Below 90%, non condensing