RS232/ RS485 TO ETHERNET CONVERTER
♦ 10/100base-T(X) Self-Adaptive Ethernet Interface.
♦ 2400bps-115200bps Line Speed And Non-Blocking Communication.
♦ Across Gateway And Routing Communication.
♦ Wi-Fi And LAN Connection To Get Data From RS-485 / RS-232.
♦ Support All Standards Windows OS.
♦ 2 Nos. RS-485 /RS-232 Communication Port Available.
♦ Simultaneously Data Can Get From Both RS-485/RS-232 Ports.
♦ Configure By Telnet, Web Browser, Or Windows Utility.
♦ Support DNS, Which Can Achieve Communication Via Domain Name.
♦ Multi Virtual Master Configure Up To 10 Nos. With Communication Status Led.
♦ Communication Circuit Designed For Lightening And Power Interference Protection.
♦ 1.5 kVA Isolation Serial-Modbus And Ethernet.
♦ Low Power Consumption Mode And High Performance Mode.
♦ Adopt 32 bits ARM processor.
♦ Support 10/100Base-T(X) self-adaptive Ethernet interface.
♦ Support AUTO MDI/MDIX, which can be connected via crossover cable and straight-through cable.
♦ Support 300bps-115200bps line speed and non-blocking communication.
♦ Support low power consumption mode and high performance mode.
♦ Support TCP Server, TCP Client, TCP Auto, UDP, Advanced TCP Server and Advanced UDP operating mode.
♦ Support AT command, which is convenient for the secondary development of users.
♦ Support DNS, which can achieve communication via domain name.
♦ Support across gateway and routing communication.
♦ Support virtual serial port drive access mode and automatic connection recovery after network interruption.
♦ Flexible serial port data framing setting, which can satisfy user’s various demands for data packets segmentation.
♦ Support standard TCP/IP SOCKET application access.
♦ TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously.
♦ UDP supports single machine or multi-machine communication, which allows multiple users to monitor or manage the serial device simultaneously.
♦ Support Windows configuration tool, serial port, WEB and other configuration forms.
♦ Support local and remote system firmware upgrading.
| ETHERNET | Standard: 10Base-T, 100Base-Tx |
| Protocol: Modbus Telnet | |
| Interface Quantity: 1 Interface Form: RJ45 | |
| Duplex Mode: Full/Half Duplex Mode Self-Adaption | |
| COM. PORT | Quantity Of Communication Port: 2 RS485, Wi-Fi , 1 RS232 |
| RS485 Signal: D+, D-, GND | |
| Baud Rate: 2400-115200BPS | |
| Data Bit: 7Bit, 8Bit | |
| Parity Bit: None, Even, Odd | |
| Stop Bit: 1Bit, 2Bit | |
| Directional Control: RS485 Direction Adopts Data Flow Automatic Control Technology | |
| CONFIGURATION | Web Configuration Management |
| Windows Configuration Tool | |
| SECURITY | Classification Of User Permissions |
| INDICATION | Power Supply Indication, Ethernet Port Indication, Rs-485 Port Indication |
| POWER SUPPLY | 14 - 48 V DC. Support Reverse Polarity Protection |
| PHYSICAL CHARACTERISTICS | Housing: ABS Plastic |
| Installation: Din Rail Or Back/Wall Mounted | |
| Dimension (W X H X D):130 X 72 X 32 All Are In mm | |
| STORAGE TEMP. | -40 °C To 80 °C |
