LEVEL MONITORING SYSTEM
♦ Field operated user friendly menu for device configuration & calibration.
♦ Accept Inputs of 4 - 20 mA, 0 - 10 V DC and 3 Wire Pt100
♦ Linear & Square Root Input Selection with 0.1 % Accuracy of FS.
♦ Isolated 0 / 4 - 20 mA DC Re - Transmission Output
♦ Isolated highly communicative serial interfacing facility (RS232 / Rs485)
♦ Optional GSM mobile connectivity for wireless remote reading purpose.
♦ Weatherproof & Flame Proof enclosure available
♦ Fully Password protected operaon for Calibration & Configuration.
♦ Sizes ranging from DN 10 – DN 1000
♦ Accuracy ±1% of actual flow rate
♦ Pulse & Isolated 4-20 mA output
♦ No pressure drops in process.
♦ Easy maintenance as no moving parts
♦ Four Numbers of Keys for Parameter Programming
♦ RS 232 port for Computer/Printer Interfacing.
♦ Empty Tube Detection and Indication
♦ Suitable to conductive liquids ≥ 5 µs/cm
♦ 2 Line Alpha numeric Or LED display.
♦ Protection : Cast Aluminum lP65 field / wall mounted
♦ Process Temp: 150 degree max. Lining : PTFE / Rubber / PP
| INPUT | Type of Input | DP Transmitter : 0 / 4 - 20mA DC |
| Pressure Transmitter : 0 / 4 - 20mA DC | ||
| Temperature : RTD PT100 | ||
| Accuracy | 0.1 % of FS | |
| Range Limit | 0.1 to 99999 Programmable with Decimal Point Selection | |
| Input impedance | >330 K for Voltage & 100 R for Current | |
| Transmitter Power Supply | 24 V DC @ 30mA max. Isolated from I/p & O/p | |
| INDICATION | Display Indication | 16 x 2 LCD Type : 5 Digit for Weight in Tons |
| 16 x 2 LCD Type : 5 Digit for Pressure & Temperature | ||
| Display Resulution | 2 Decimal Point in Weight, 1 Decimal Point in Pressure & Temperature | |
| COMMUNICATION | Communication Protocol & mathod M | Modbus RTURS- 485/RS- 232 Communication |
| Programmable parameter & Max No. | Baud rate,Parity , Node address , Stop bit & 0-256 unit | |
| Wireless Communication | GSM/GPRS base mobile(sms) Communication | |
| GENERAL SPECIFICATION | Power Supply | 110 / 240 V AC, 50 Hz or 12 / 24 V DC [Optional on Demand] |
| Power Consumption | 4 Watts Max | |
| Operating ambient Temperature and Humidity | Tempe: 0 - 50 Degree C & RH: Below 90 % Non Condensing | |
| Programming of parameters | Through 4 tactile keys | |
| Flame Proof | Enclosure [If Req.] | CMRI IIA, IIB External Keys & Cable Entries |
