TEMP + DP INDICATOR_3” LCD
♦ USFDA- 21 CFR Part 11 - GAMP-4 Compatible With Data Logging EMS SCADA Software.
♦ Compact, All Stainless Steel Enclosure With 35 mm Depth For Installation In Prefab Panels.
♦ MODBUS RTU Multi Drop RS-485 / Ethernet TCP-IP / RF Wireless / Wi-Fi / Blue Tooth Comport Available.
♦ Incorporates Highly Stable Digital Built-In Or Remote Sensor For Diff. Pressure.
♦ Red LED (0.56" Or 1") And Touch Screen LCD Display (3.2"/ 4"/ 7") For Displaying DP Or With Time.
♦ Internal Data Memory With Time Stamping With Auto Data Backfilling Facility To Avoiding Data Loss.
♦ User Selectable Set Limits For Process Value Violation & Inbuilt Audible Buzzer With Acknowledgments.
♦ Process Parameter Hi And Low LED Status Indication For All Three Channel With AHU On/Trip Status Indication.
♦ All Channel Ranges & Unit Are Programmable.(Through Front Key Pad & Touch Screen).
♦ 3 Level Password Protection For Calibration And Programming Mode.
♦ Time Display With Auto Masters, Sever (NTP) Or GPS Time Synchronised (HH : MM ).
♦ User Programmable Delay Time Selectable For Alarm (Alert Or Action).
♦ Brick And Modular Wall Mounting And Flush Mounting And Flameproof Model Available.
♦ FDA 21 CFR part 11 - GAMP-4 compatible.
♦ Micro controller based indicator with inbuilt Temperature + RH measurement in single enclosure.
♦ Incorporates highly stable built-in or Remote Temp.+ RH sensor.
♦ 3 Digit, 0.56" bright LED display for displaying RH & Temperature.
♦ Process parameter Hi and Low LEDs. Status indication For both channel.
♦ User selectable set limits for process value violation.
♦ Inbuilt buzzer to audible process value violation.
♦ Password protection for calibration and programming mode.
♦ Software Calibration for 2 channels.
♦ MODBUS RTU multi drop RS-485 serial communication for PLC, SCADA, etc.
♦ Programmable devise address, baud rate, (max no. of device is 1-256).
♦ Remote programmable from master device.
♦ User programmable offset correction.
♦ Compact, All Stainless Steel enclosure with 35 mm depth for installation in prefab panels.
♦ Brick and modular wall mounting and flush mounting.
♦ Ex. Flameproof model available for Hazardous applications.
| INPUT | Temperature | Integral Or Remote (4-20 Ma & RS 485) |
| Nos. Of Input | 1 Nos . (Temperature & With Time) | |
| Transmitter Power Supply | 24 V /5 V DC @ 30 mA Max, Isolated From I/P & O/P. | |
| INDICATION | Temperature With Optional Time & Date | LED : Red Seven Segment 0.56"/1", 6-Leds For Visual Alarms & Com |
| LCD : 3.2 Inch / 4 Inch / 7 Inch- Touch Screen Multi Colour | ||
| RANGE | Temperature | -40 To 60.0 *C && - 40 To 125 *C |
| Time Synchronized | Date & Time Synchronised Trough Sever Or GPS With Built In RTC | |
| Display Resolution | Temp- 0.1 With Decimal Point | |
| ACCURACY | Temperatures | 1 % On Fs Response Time : 3 Sec |
| Time Synchronized | 0.01 % Response Time : 1 Sec | |
| COMMUNICATION | Communication Protocol | Modbus RTU RS-485 & Ethernet Isolated, Wireless Rf, Wi-Fi, Bluetooth |
| Programmable Parameters. | Baud Rate , Parity , Node Address , Stop Bit & Ip Address | |
| Read /Write Parameters | Read: Process Value ,Decimal Point. Write: Hi Low Set Point. | |
| No. Of Slave Id | Total 1-128 Unit. With Programmable Ip Address. | |
| PROGRAMMABLE PARAMETERS | Set Point / High Scale / Low Scale | Full Range As Per Input Selection |
| Programming Of Parameters | Through 4 Tactile Keys & Touch Screen (With Password Protections) | |
| Status Indication | Full Scale High Or Full Scale Low. | |
| MEMORY | 1 Lakh Data With Auto Data Back Filling - Logging Time Selectable : 1 To 5000 Seconds From Software. | |
| OTHER | Mounting | Bricks And Modules Wall Flush Panel Mounting. |
| Moc | Full SS 316 Plate And Box , Back Side Wall Mounting Back Box M S | |
| Supply Voltage & Power Consu. | 24 V Dc @ 4 Watts Maximum | |
| Ambient Temperature & Humidity | Temp.:- 0- 50 °C Humidity Below 90% None Condensing. | |
