TEMP + DP INDICATOR_BASIC MODEL
♦ USFDA- 21 CFR Part 11 - GAMP-4 Compatible With Data Logging EMS SCADA Software.
♦ Compact, All Stainless Steel Enclosure With 35 mm Depth For Installation In Prefab Panels.
♦ MODBUS RTU Multi Drop RS-485 / Ethernet TCP-IP / RF Wireless / Wi-Fi / Blue Tooth Comport Available.
♦ Incorporates Highly Stable Digital Built-In Or Remote Sensor For Diff. Pressure.
♦ Red LED (0.56" Or 1") And Touch Screen LCD Display (3.2"/ 4"/ 7") For Displaying DP Or With Time.
♦ Internal Data Memory With Time Stamping With Auto Data Backfilling Facility To Avoiding Data Loss.
♦ User Selectable Set Limits For Process Value Violation & Inbuilt Audible Buzzer With Acknowledgments.
♦ Process Parameter Hi And Low LED Status Indication For All Three Channel With AHU On/Trip Status Indication.
♦ All Channel Ranges & Unit Are Programmable.(Through Front Key Pad & Touch Screen).
♦ 3 Level Password Protection For Calibration And Programming Mode.
♦ Time Display With Auto Masters, Sever (NTP) Or GPS Time Synchronised (HH : MM ).
♦ User Programmable Delay Time Selectable For Alarm (Alert Or Action).
♦ Brick And Modular Wall Mounting And Flush Mounting And Flameproof Model Available.
♦ FDA 21 CFR part 11 - GAMP-4 compatible.
♦ Micro controller based indicator with inbuilt Temperature + RH measurement in single enclosure.
♦ Incorporates highly stable built-in or Remote Temp.+ RH sensor.
♦ 3 Digit, 0.56" bright LED display for displaying RH & Temperature.
♦ Process parameter Hi and Low LEDs. Status indication For both channel.
♦ User selectable set limits for process value violation.
♦ Inbuilt buzzer to audible process value violation.
♦ Password protection for calibration and programming mode.
♦ Software Calibration for 2 channels.
♦ MODBUS RTU multi drop RS-485 serial communication for PLC, SCADA, etc.
♦ Programmable devise address, baud rate, (max no. of device is 1-256).
♦ Remote programmable from master device.
♦ User programmable offset correction.
♦ Compact, All Stainless Steel enclosure with 35 mm depth for installation in prefab panels.
♦ Brick and modular wall mounting and flush mounting.
♦ Ex. Flameproof model available for Hazardous applications.
INPUT | Temperature | Integral Or Remote (4-20 mA & RS 485) |
Room Deff. Pressure. | Integral Or Remote (4-20 mA & RS 485) | |
Nos. of input | 3 Nos . (Temp + Dp Or With Time) | |
Transmitter Power Supply | 24V/5 V DC @ 30 mA Max, Isolated From I/P & O/P. | |
INDICATION | Temperature + Diff. Room Pressure With Optional Time | LED : Red Seven Segment 0.56"/1", 6-Leds For Visual Alarms & Com |
LCD : 3.2 Inch / 4 Inch / 7 Inch- Touch Screen Multi Colour | ||
RANGE | Temperature | -40 To 60.0 *C With Decimal Point. |
Room Diff.Pressure | -150 To 150 Pa & -400 To 400 Pa, On Site mmWC Or Pascal Selectable. | |
Date & Time Synchronized | Date & Time Synchronised Trough Sever Or GPS With Built In RTC | |
Display Resolution | Temp. & DP - mmWC - 0.1 & Pa - 1 | |
ACCURACY | Temperatures | 0.25 % On Fs Response Time : 8 Sec |
Room Diff. Pressure | 1 % On Fs Response Time : 1 Sec | |
Date & Time Synchronized | 0.01 % Response Time : 1 Sec | |
COMMUNICATION | Communication Protocol | Modbus RTU RS-485 & Ethernet Isolated, Wireless Rf, Wi-Fi, Bluetooth |
Programmable Parameters. | Baud Rate , Parity , Node Address , Stop Bit & Ip Address | |
Read /Write Parameters | Read: Process Value ,Decimal Point. Write: Hi Low Set Point. | |
No. Of Slave ID | Total 1-128 Unit. With Programmable Ip Address. | |
PROGRAMMBALE PARAMETERS | Set point / High Scale / Low Scale | Full Range As Per Input Selection |
Programming Of Parameters | Through 4 Tactile Keys & Touch Screen (With Password Protections) | |
Status Indication | Full Scale High Or Full Scale Low. | |
MEMORY | Ambient Temperature & Humidity | |
OTHER | Mounting | Bricks And Modules Wall Flush Panel Mounting. |
MOC | Full SS 316 Plate And Box , Back Side Wall Mounting Back Box M S | |
Supply Voltage & Power Consumption | 24 V DC @ 4 Watts Maximum | |
Ambient Temperature & Humidity | Temp.:- 0- 50 °C Humidity Below 90% None Condensing. |