SCANNER & DATALOGGER

UT-10XX

  • DATA LOGGER & RECORDERS

     

    ♦ 4,8,16,24 & 32 Channel Universal Input (RTD, Thermocouple, 0-1 /5/10 VDC, 0/4-20mA, Input Signals).

    ♦ On Board 15000 Reading Per Channel Storage. With Auto Data Back Filling & Data Logging.

    ♦ USB Port For Direct Data Logging. Optional Blue tooth & RF Wireless (2 KM).

    ♦ Individual HI/LO Alarm With 2 Relay Outputs. ( Optional For Each Channel).

    ♦ Ethernet Port (Optional) Networkable.

    ♦ PC Based Data Acquisition Sofware For Data Logging Reporting And Trending.

    ♦ 21 CFR Part 11 (Optional) None Editable File Format.

    ♦ Different Housing Like Front End IP65 Protection, Flame Proof.

    ♦ 3.5 / 7 Inch TFT With Touch Screen Control.

    ♦ Direct Printout To Dot Matrix Printer Or USB Printing.

    ♦ On Board USB Port (Memory Stick With 4 GB Memory).

    ♦ Can Send Direct SMS On Alarm Condition To User.

    ♦ Can Be Working With Wireless Probes For Pharma & Other Application.

    ♦ Individual Universal Input Channel Selection.

    ♦ Logging Intervals Can Be Set From 1 To 65535 Sec..

    ♦ High-Resolution 16-Bit ADC Used For Analog Input.

  •  FEATURE

     

     

    ♦ 8 or 16 Channel universal input (RTD, Thermocouple, 0‐1 /5/10 VDC, 0/4‐20mA, input signals)

    ♦ Onboard 32000 Reading per channel storage.

    ♦ Parallel Port.

    ♦ Individual HI/LO alarm with 2 relay outputs. ( optional for each channel)

    ♦ Networkable using Ethernet Port (Optional)

    ♦  PC Based Data Acquisition Software

    ♦ 21 CFR Part 11 (Optional)

    ♦ Front end IP65 Protection

    ♦  3.5 inch TFT With Touch Screen Control

    ♦ Direct Printout to Dot Matrix Printer

    ♦  Onboard USB Port (Memory Stick with 4 GB Memory)

    ♦ Can send direct sms on alarm condition to user

    ♦ Can send e‐mail reports

INPUT Input Type For Input 1 to 32 channel T/C K, J, R, S, E, N, T
RTD Pt-100, Cu 53 ( 2wire & 3 wire)
Current 0 - 20 mA DC, 4 - 20 mA DC
Voltage 0 - 5 V / 1 - 5 V / 0.5 -2.5V / 0 - 10 V DC
Transmitter Power Supply 24 V DC @ 30 mA Max, Isolated From I/P & O/P
Cold Junction Comp. & Sensor Break Ind. Software Base Automatic
Range Limits As Per Input Range Table
Accuracy +/- 0.1 % Of Span For Linear & RTD, +/-0.25 % For T/C
Input Impedance >330 K For Voltage , mV , And T/C, 100 R For Current
INDICATION Indication 4,8,16 Ch :- 3.5 Inch TFT -Touch Screen , 24,32 Ch- 7 Inch Touch Screen.
Status Indication LEDs For Relay Status & Communication
Alarm Modes Very Low/Low/High/Very High
MEMORY USB Pen Drive Direct Pen Drive For Data Memory(4 GB or 8 GB) (File Formats :- PDF Or Excel)
Non-Volatile Data Flash Data Storage: 15,000 Records Per Channels With Auto Data Back Filling
OUTPUT Relay Output NO - C - NC Contacts , 5A@240 V AC Resistive
Sir Output 1 / 2 / 3 / 4 Relays / SSR output
Transmitter Power 24 V DC @ 20 mA ,12 V DC @ 20 mA
Retransmission Current & Voltage Outputs On Line Dot Metric Printer
COMMUNICATION Communication Protocol & Method Modbus RTU RS- 485/ Ethernet TCP-IP & Wi-Fi , Bluetooth , USB
Programmable Parameter Baud Rate, Parity , Node Address , Stop Bit & 0-256 Unit IP Add
Wireless Communication RF 2 KM / GPRS Base Mobile(SMS) Communication
PROGRAMMABLE PARAMETER Set point / Hysteresis / High Scale / Low Scale Full Range As Per Input Selection.
Relay Logic F.S. High & Low Alarm, Dead Band Alarm
Display Resolution -1999 to 9999 Fully Configurable For Linear Input
Parameter Programming Touch Screen. Or Through 5 Tactile Keys
OTHER Dimension & Mounting As Per Box Selection & Wall/Structure 2/2 Holes
(A) Supply Voltage (B) Power Consumption (A) 110/230 V AC/24 V DC, 50/60 Hz (B) 4 Watts Maximum
Operating Ambient Temperature And Humidity 0~50 °C , And Humidity : Below 90%, Non Condensing